Menu
CMC is following the most up-to-date guidelines from the Center for Disease Control and the World Health Organization. Read More >>

CLUTCH PPE Inspection

CLUTCH PPE INSPECTION

The CLUTCH should have a periodic inspection performed by a competent person at least once every 12 months, after any exceptional event(s), or if there is any doubt to the condition of the product. For each inspection, CMC recommends the Periodic PPE Inspection Form be completed, signed and archived for the life of the product. In case of retirement, ensure to render the device useless before disposal to prevent further use.

Provided below are the CLUTCH PPE inspection documents including the CLUTCH Inspection Procedure and CLUTCH Periodic PPE Inspection Form. These documents offer guidance for performing a detailed inspection of both the 11 mm CLUTCH and 13 mm CLUTCH, however, any mention of the CE mark or CE requirements is specific to the 11 mm CLUTCH. Visit the CLUTCH product page for the latest version of the User Manual for reference during inspection.

The materials provided here are not exhaustive. Inspection by a competent person is required. See the PPE homepage for more information on a “competent person”. By performing a periodic inspection and signing periodic inspection forms, you are declaring yourself as a competent person and assuming responsibility for the implementation of the inspection processes and proper disposition of the PPE.

PRODUCT INFORMATION

11 MM CLUTCH, ITEM #335011

13 MM CLUTCH, ITEM #335013

RESOURCES FOR CLUTCH PPE INSPECTION

CLUTCH INSPECTION PROCEDURE

CLUTCH PERIODIC PPE INSPECTION FORM

CLUTCH LATCH LUBRICATION PROCEDURE

Scroll to top
CMC